Septic repair · Langley & the Fraser Valley
Septic System Repair in Langley & the Fraser Valley
Slow drains, odours, an alarm or a backed-up system? We find the cause first with pipe camera inspection and jetting, then fix what’s actually wrong. No guesswork, no overselling.
✔ ROWP-certified ✔ Licensed & insured ✔ Family-owned in Langley
Pumps, floats and alarms
Effluent pump, float switch and alarm replacements, filter cleaning and tank repairs.
Lines and drain fields
Blocked lines cleared with jetting. Failed fields assessed, redesigned and replaced with our ROWP planning partner.
Pay for what’s needed
We diagnose before recommending a repair, so you only pay for the work your system actually needs.
Septic System Repair
We find the cause first, then fix what’s actually wrong.
Septic Repairs in Langley and Area
Most septic problems start small. A tank that’s overdue for pumping, a blocked line or filter, a failed pump or float, or a saturated drain field can all lead to slow drains, odours and backups.
We use pipe camera inspection and high-pressure jetting to see what’s going on before recommending a repair, so you only pay for the work your system actually needs. No guesswork, no overselling.
Proseptix is a family-owned, fully licensed and insured septic company based in Langley. Our work is supervised by a Registered Onsite Wastewater Practitioner (ROWP), and we handle everything from a pump-out to a full drain field replacement.
Signs Your Septic System Needs Repair
- Slow drains or gurgling plumbing
- Sewage odour inside the house or in the yard
- A septic alarm that keeps going off
- Wet, spongy or unusually green ground over the drain field
- Water backing up into sinks, tubs or floor drains
- Standing water near the tank or drain field
These signs indicate the need for immediate professional assessment to prevent health hazards and property damage. If sewage is backing up into the house, call 778-763-1377 now.
Repairs We Handle
Backups and Full Tanks
A pump-out relieves a full or backed-up system right away and gives us a look inside the tank to find the cause.
Pumps, Float Switches and Alarms
We replace failed pumps, float switches and alarms so your system moves wastewater the way it should.
Filters and System Repairs
Clogged filters are a common cause of slow drains and backups. We clean filters and repair system components to restore normal flow.
Blocked Septic, Sanitary and Storm Lines
High-pressure jetting clears blocked lines between the house, the tank and the drain field.
Pipe Camera Inspection
A pipe camera locates clogs, cracks and damage without unnecessary digging, so the repair goes where the problem is. See our drain and pipe camera inspection service.
Drain Field Repair and Replacement
Jetting and maintenance can restore flow in some drain fields. When a field has failed, we work with our ROWP planning partner on a new design and handle the installation.
Repair or Replace?
One Company From Diagnosis to Fix
Not every problem means a new system. We’ll assess your system and tell you whether a repair will do the job, or whether a failed component or drain field needs replacing. If it does, our design and installation services take it from there, so you deal with one company from start to finish.
Done Right Under BC Rules
In British Columbia, the Sewerage System Regulation (SSR) requires that certain septic work be designed, supervised or inspected by a ROWP. Our ROWP-supervised work keeps your repair compliant. Learn more about our ROWP septic inspections and maintenance.
Serving Langley and the Fraser Valley
We repair septic systems across Langley, Aldergrove, Abbotsford, Chilliwack, Mission, Maple Ridge, Pitt Meadows, Surrey and White Rock.
Septic Repair FAQs
My septic alarm is going off. What should I do?
An alarm usually means the liquid level in the pump chamber is high. Cut back on water use (laundry, dishwasher, long showers) and call us. Don’t keep silencing it and carry on.
Why is my septic system backing up?
The most common causes are a tank that’s overdue for pumping, a blocked line or filter, a failed pump or float, or a saturated drain field. A pump-out and camera inspection usually pinpoint it.
Can my drain field be repaired?
Sometimes. Jetting and maintenance can restore flow in some cases; a failed field may need redesign and replacement. We’ll assess it and tell you which you’re dealing with.
How do I know if my drain field is failing?
Wet or spongy ground, unusually green grass or standing water over the field, slow drains and sewage odours are the most common signs. An assessment and camera inspection will confirm it.
How much does a septic repair cost?
It depends on what’s wrong. A blocked filter or failed float is a small job; a failed drain field is a much bigger one. We find the cause first and explain your options before any work starts.
Which areas do you serve?
We’re based in Langley and serve Langley, Aldergrove, Abbotsford, Chilliwack, Mission, Maple Ridge and the surrounding Fraser Valley.
Customer Reviews
We’re the Experts in Septic System Repair
Fix the Problem, Not Just the Symptom
We find the cause first, then fix what’s actually wrong, so your system keeps running and you avoid repeat call-outs.
Related services
Other ways we can help
Drain & Pipe Camera
Not sure what’s wrong underground
See blockages, roots and damage before anything gets dug up.
Learn more →
Line Jetting
Blocked or backed-up lines
High-pressure jetting for septic, sanitary and storm lines.
Learn more →
Septic System Maintenance
Keep it running, avoid surprises
Filters, pumps, floats and alarms checked and serviced.
Learn more →
Septic Tank Pumping
Tank due for a pump-out
Septic and holding tank pump-outs, done clean and on time.
Learn more →
Book a repair
Something wrong with your septic? Tell us what’s happening.
Describe the problem and we’ll get back to you fast. If sewage is backing up into the house, call 778-763-1377 now.